Counter weight offset opening.
Counter Weight offset foam cap installed.
Closing counter weight offset in stabilizer.
Completed counter weight offset.
Preparing to finish leading edge.
Glass bid on one side leading edge. Note - Peel Ply.
Adding glass bid to leading edge of stabilizor.
Horizontal Stabilizer Closed out ready for finish.
Finish work on leading edge of stabilizer.
Stabilizer / Elevator hinge detail.
A complete and nice looking stabilizer and elevator.
Ok, now that we are finished, let's read the manual.
(Balancing the elevator - note lead in cups.)
Using shims and micro-flox to set incidence to horz-
stabilizer during mount.
Horizontal Stabilizer mounted and Vertical Stabilizer
spar in place.